DETAILS MAKE THE DIFFERENCE
The DeepCool CK500 WH Mid-Tower Case is a sleek and minimal white case that delivers balanced airflow and noise performance for the modern-day builder with two pre-installed 140mm performance fans.

QUICK-RELEASE SOLID FRONT PANEL
Sleek curved edges offer a premium look and feel in a minimalistic design while still featuring large ventilation for more airflow. The solid steel panel adopts an easy quick-release magnetic connection.

WIDE AND SPACIOUS INTERIOR
Maximize potential with flexible configurations that meet the needs of any system setup. With space for large GPUs up to 380mm and CPU coolers up to 175mm in height, the CK500 WH provides ample space without being too bulky.

BIG AIR COOLING
Two pre-installed DeepCool 140mm airflow-focused fans help concentrate cooling performance for lower temperatures and noise levels.

CHOOSE YOUR COOLING CONFIGURATION
The CK500 WH has great cooling capacity with up to 6x 120mm or 5x 140mm cooling fans and liquid cooling support for 280/360mm radiators through the front panel and 280/240mm radiators on the top panel.

CONVENIENT STORAGE OPTIONS
Install up to 2x 2.5in storage drives directly onto the motherboard tray with quick-release push-pins and 2x 3.5in HDDs on a tool-less tray design for extra simplicity.

IMPROVED BUILDER EXPERIENCE
– Three dedicated dust-filters in front, top, and bottom with magnetic or quick-release attachments.
– The adjustable GPU anti-sag bracket can be positioned in two locations for various sized graphics cards.
– The full-sized tempered glass panel slides and holds in place before fastening with captive thumbscrews.
– Rubber Grommets and ample room behind the motherboard tray help with cable management.
– Independent PCIe baffles are reusable and easy to remove.

MODERN FRONT I/O
Features two USB 3.0 ports, a single USB 3.1 Type-C port, and a combination audio jack for the most important connections up close.

Form Factor
Mid Tower

Motherboard
E-ATX
ATX
Micro ATX
Mini-ITX

Colour
White

Materials
ABS
SPCC
Tempered Glass

Drive Bays
Internal 3.5″: 2
Internal 2.5″: 2

Power Supply Support
ATX PS2 (maximum length: 160mm)

I/O Panel
2 x USB 3.0
1 x Audio
1 x USB Type-C

Expansion
Slots: 7

Cooling Fans Compatibility
Front: 3 x 120mm / 2 x 140mm (1 x 140mm fan installed)
Top: 2 x 120mm / 2 x 140mm
Rear: 1 x 120mm / 1 x 140mm (1 x 140mm fan installed)

Liquid Cooler Compatibility
Front: 120 / 140 / 240 / 280 / 360
Top: 120 / 140 / 240 / 280
Rear: 120 / 140

Clearances
CPU Cooler Height Limit: 175mm
VGA Length Limit: 380mm
PSU Length Limit: 160mm

Product Dimensions ( L x W x H )
456mm x 230mm x 471mm

Weight
Net: 8KG

DETAILS MAKE THE DIFFERENCE
The DeepCool CK500 Mid-Tower Case is a sleek and minimal case that delivers balanced airflow and noise performance for the modern-day builder with two pre-installed 140mm performance fans.

QUICK-RELEASE SOLID FRONT PANEL
Sleek curved edges offer a premium look and feel in a minimalistic design while still featuring large ventilation for more airflow. The solid steel panel adopts an easy quick-release magnetic connection.

WIDE AND SPACIOUS INTERIOR
Maximize potential with flexible configurations that meet the needs of any system setup. With space for large GPUs up to 380mm and CPU coolers up to 175mm in height, the CK500 provides ample space without being too bulky.

BIG AIR COOLING
Two pre-installed DeepCool 140mm airflow-focused fans help concentrate cooling performance for lower temperatures and noise levels.

CHOOSE YOUR COOLING CONFIGURATION
The CK500 has great cooling capacity with up to 6x 120mm or 5x 140mm cooling fans and liquid cooling support for 280/360mm radiators through the front panel and 280/240mm radiators on the top panel.

CONVENIENT STORAGE OPTIONS
Install up to 2x 2.5in storage drives directly onto the motherboard tray with quick-release push-pins and 2x 3.5in HDDs on a tool-less tray design for extra simplicity.

IMPROVED BUILDER EXPERIENCE
– Three dedicated dust-filters in front, top, and bottom with magnetic or quick-release attachments.
– The adjustable GPU anti-sag bracket can be positioned in two locations for various sized graphics cards.
– The full-sized tempered glass panel slides and holds in place before fastening with captive thumbscrews.
– Rubber Grommets and ample room behind the motherboard tray help with cable management.
– Independent PCIe baffles are reusable and easy to remove.

MODERN FRONT I/O
Features two USB 3.0 ports, a single USB 3.1 Type-C port, and a combination audio jack for the most important connections up close.

Form Factor
Mid Tower

Motherboard
E-ATX
ATX
Micro ATX
Mini-ITX

Colour
Black

Materials
ABS
SPCC
Tempered Glass

Drive Bays
Internal 3.5″: 2
Internal 2.5″: 2

Power Supply Support
ATX PS2 (maximum length: 160mm)

I/O Panel
2 x USB 3.0
1 x Audio
1 x USB Type-C

Expansion
Slots: 7

Cooling Fans Compatibility
Front: 3 x 120mm / 2 x 140mm (1 x 140mm fan installed)
Top: 2 x 120mm / 2 x 140mm
Rear: 1 x 120mm / 1 x 140mm (1 x 140mm fan installed)

Liquid Cooler Compatibility
Front: 120 / 140 / 240 / 280 / 360
Top: 120 / 140 / 240 / 280
Rear: 120 / 140

Clearances
CPU Cooler Height Limit: 175mm
VGA Length Limit: 380mm
PSU Length Limit: 160mm

Product Dimensions ( L x W x H )
456mm x 230mm x 471mm

Weight
Net: 8KG

The ATHENA supports up to 6 fans and fitted as standard with 2 x 120mm black fans, 1 at the front and 1 at the rear, as well as liquid cooling support with mountings for up to 240mm radiators at the front and 120mm at the rear.

Key Features
– Silent Case with Soundproofing: Built-in sound dampening matting will keep your system quiet without restricting airflow.
– Cooling: Supports up to 6 cooling fans with 2 x 120mm black fans included.
– Water-Cooling Support: Supports up to 240mm at the front and 120mm at the rear. (Pre-installed fans will need to be removed)
– I/O Panel – Easy acces to 2 x USB 2.0 and 1 x USB 3.0 ports as well as HD audio.

Form Factor
Mid Tower

Motherboard Support
ATX
Micro ATX
Mini-ITX

PSU Support
Standard ATX

PSU Location
Bottom

PSU Included
No

Water Cooling Ready
Yes

Supported Radiator Size
Front: Up to 240mm
Rear: Up to 120mm

Material
Body: 0.55mm SPCC with sound-dampening foam panels

Panels
Sound-dampening front, top, left and right side panels
(Top panel can be removed for additional airflow)

Drive Bays
Internal 3.5″: 2
Internal 2.5″: 2
(Combo tray within PSU shroud)

Expansion
Slots: 7

Cooling
Front: 3 x 120mm (1 x 120mm Black Fan included)
Top: 2 x 120mm Fans
Rear: 1 x 120mm Fan (1 x 120mm Black Fan included)

IO Ports
1 x USB 3.0
2 x USB 2.0
HD Audio
Power Button
Reset Button

Clearence
Internal Cable Management Depth: 22mm
GPU Max Length: 310mm
CPU Cooler Maximum Height: 160mm
PSU Shroud: Included

Colour
Black

Product Dimensions ( L x W x H )
340 x 200 x 449 mm

Weight
Net: 5 KGs
Gross: 5.4 KGs

The New CRONUS ACHOS is a Mid Tower professional gaming case, supporting a simple and easy to build internal structure, with 4mm tempered glass front and left side panel, allowing you to see the beautiful lighting from the ARGB fans inside.

Supporting up to 6 fans for superior air cooling and comes fitted as standard with 4 x 120mm F1 ARGB LED fans, 3 at the front and 1 at the back. All switchable through the I/O Panel or through your motherboards internal software via the 3-pin ARGB connector. (Supported motherboards only). To Sync the RGB lights on the case with the motherboard software. Hold down the button the on the case that you would use to cycle through the colours for a few seconds, it will transfer the control from the case to the board.

You can enhance your cooling further with room at the front for a radiator up to 240mm and 120mm at the rear. This gaming case has good compatibility, it supports ATX, Micro ATX, Mini-ITX motherboards and ATX power supplies, with cabling hidden behind the black PSU shroud. On the top of the case for easy access is 1 x USB 3.0, 2 x USB 2.0 and HD audio allowing you to connect to a variety of devices, as well as your ARGB switch for on-the-fly chaning of the LEDs on your fans.

Key Features
– Stylish Exterior: 4mm thick tempered glass front and left side panel not only gives the ACHOS a professional look but allows you to show off the lighting coming from your fans.
– Fans: Supports up to 6 fans with 4 x F1 ARGB fans included to give your case some added colour in your finished build.
– Water-Cooling Support: As well as supporting 6 fans the ACHOS supports a radiator up to 240mm at the front and 120mm at the rear to give you extensive cooling support.
– I\O Panel: Easy accessible 2 x USB 2.0 and 1 x USB 3.0 ports on the top with transfer speeds of 5Gbps means you can connect to a range of media devices.
– Removable Dust Filters: A dust filter on the top and bottom helps to prevent dust from getting into your build and improve the performance of your chassis.

Form Factor
Mid Tower

Motherboard Support
ATX
Micro ATX
Mini-ITX

PSU Support
Standard ATX

PSU Location
Bottom

PSU Included
No

Water Cooling Ready
Yes

Supported Radiator Size
Front: Up to 240mm
Rear: Up to 120mm

Material
Body: 0.5mm SPCC
Front and Side: 4mm Tempered Glass

Side Panel
4mm Tempered Glass

Drive Bays
Internal: 2 x 3.5″ / 2 x 2.5″

Expansion
Slots: 7

Cooling
Front: 3 x 120mm / 3 x 140mm Fans (3 x 120mm F1 ARGB Fans included)
Top: 2 x 120mm / 2 x 140mm Fans
Rear: 1 x 120mm Fan (1 x 120mm F1 ARGB Fan included)
Side: None
Bottom: Filtered Vent For PSU

IO Ports
1 x USB 3.0
2 x USB 2.0
HD Audio
ARGB Switch

Clearance
Internal Cable Management Depth: 15mm
GPU Max Length: 350mm
CPU Cooler Maximum Height: 160mm
PSU Shroud: Included

Colour
Black

Product Dimensions ( L x W x H )
405 x 195 x 450mm

Weight
Net: 5.9 KGs
Gross: 6.7 KGs

Key Features
– Available configuration parameter: 2 x 5.25
– Elegant and Classy front panel design
– High quality black rubber coated finishing on the front panel
– Support Standard ATX switch power supply
– Support high end graphic card up to 340mm in length
– All Black interior and black internal cables to match
– Ample space for cable management
– Intel approved TAC2.0 side panel design
– Supports 1 x USB3.0 and 1 x USB2.0 with HD Audio
– Includes 1 x 8cm black fan (back of the chassis)

Form Factor
Micro Tower

Motherboard Support
Micro ATX
Mini-ITX

PSU Support
Standard ATX

PSU Location
Top

PSU Included
No

Material
0.5mm SECC Metal
Plastic

Side Panel
Vented

External Bays
5.25″ External: 2
3.5″ External: 1
3.5″ Internal: 2
2.5″ Internal: 1

Expansion
Slots: 4

Cooling
Front: 1 x 80mm / 1 x 92mm fan
Top: None
Rear: 1 x 80mm / 1 x 92cm fan (1 x 80mm fan inc.)
Side: TAC2.0 Vent
Bottom: None

I/O Panel
1 x USB 3.0
1 x USB 2.0
1 x HD Audio
1 x Microphone

Clearance
GPU Max Length: 340mm
CPU Cooler Maximum Height: 140mm

Colour
Black

What’s In The Box
Case
Screw Pack
Manual

Product Dimensions ( W x H x D )
173mm x 365mm x 368mm

Packaging Dimensions ( W x H x D )
440mm x 485mm x 246mm

Weight
Net: 3.2 KGs
Gross: 4.1 KGs

The Elite is an ideal choice for anyone looking to build an office or home based PC on a budget.

– Full mesh front panel with 1 x USB 3.0
– Black chassis with 80mm rear cooling fan included
– Micro ATX chassis with a simple design
– Intel Approved TAC2.0 thermal chassis
– Black coated interior

PSU Specifications
Max PSU Rail Output
+3.3V: 15A
+5V: 15A
+12V: 30A
-12V: 0.5A
+5VSB: 2.5A

PSU Connectors
20 + 4pin ATX Mainboard: 1
4pin +12V CPU: 1
SATA: 3
4pin Molex: 2
FDD: 1

Case Specifications
Form Factor
Micro Tower

Motherboard Support
Micro ATX
Mini-ITX

PSU Support
Standard ATX

PSU Location
Top

Body Material
0.5mm SPCC

Front Bezel Material
Mesh

Side Panel
Vented

Internal Cable Management Depth
21mm

Drive Bays
2 x 5.25″ External
2 x 3.5″ External
3 x 3.5″ Internal
2 x 2.5″ Internal

Drive Bay Notes
External Bays include 2 x 5.25″ Bays & 2 x 3.5″ Bays

Expansion Slots
4 x Full Size

Cooling
Front: None
Top: None
Rear: 1 x 80mm Fan (1 x 80mm Fan Inc.)
Side: None
Bottom: None

IO Ports
1 x USB 3.0
1 x USB 2.0
1 x HD Audio

GPU Max Length
330mm

CPU Cooler Maximum Height
160mm

Front Bezel Colour
Black

Body Colour
Black

PSU Included
Yes

Dimensions ( W x H x D )
173 x 370 x 417 mm

Weight
4.1kg

Features
– Interior – All black finish.
– Cable Routing – Grommet-lined cable routing holes with 36 mm of space behind the motherboard tray.
– Expansion – 7 expansion slots.
– Sturdy and Stable – Sturdy steel frame for durability.
– Solid Metal construction – High quality SGCC.

Model
VSK-4000B-U3/U2

Form Factor
Mid Tower

Motherboard Support
ATX
Micro ATX
Mini-ITX

Material
Steel

I/O Ports
1 x Headphone
1 x Mic In
1 x USB 2.0
1 x USB 3.0

Drive Bays
1 x 3.5″ External
5 x 3.5″ Internal
3 x 5.25″ External

Expansion Slots
7

Fan Bays
2 x 120 mm

Fans Included
1 x 120 mm

Side Window
No

Power Supply Support
ATX

Max VGA Card Length
318 mm

Colour
Black

Dimensions ( W x H x D )
185 x 440 x 412 mm

Building a system starts with buying a case, then comes the parts that goes into it, which the cost can add up very quickly. The VSK3000 is here to provide the basic platform to start building your very own system. It’s humble design and practical functionality contains the fundamentals for a performance chassis. The VSK line is designed to be a stepping stone for those who want to upgrade their system later on. Each chassis devotedly serves their purpose as a cost-effective, unforgettable part of your system building experience.

Form Factor
Micro Tower

Motherboard Support
Micro ATX
Mini-ITX

PSU Support
Standard ATX, Micro ATX

Water Cooling Ready
No

Dimensions
173mm x 365mm x 393mm (W x H x D)

Packaging Dimensions
210mm x 450mm x 400mm (W x H x D)

Body Material
SGCC

Front Bezel Material
Plastic

Side Panel
Vented

Expansion Bays
External Bays:2 x 5.25″ External
1 x 3.5″ External
Internal Bays:2 x 3.5″ Internal
1 x 2.5″ Internal
Drive Bay Notes:-
Expansion Slots:4 x Full Size

Case Cooling
Cooling Front:1 x 92 mm front intake fan (optional)
Cooling Top:none
Cooling Rear:1 x 92 mm rear exhaust fan
Cooling Side:None
Cooling Bottom:None

IO Ports
1 x USB 3.0
1 x USB 2.0
1 x HD Audio (Also Supports AC’97)
1 x Microphone

Front Bezel Colour
Black

Body Colour
Black

PSU Included
No

PSU Connections
N/A

Net Weight (KGs)
4.1kg

Get the Second Ones, Have Better Cooling
Strong Case Fan Support
– Up to mount 2 x 140 mm fans both on the top and in the front.

Superior Radiator Space
Supports up to 280 mm radiator in the front without any obstacle.

All-Dimension Airflow Path
Air intakes in the front, on the right and left, and at the bottom ensures more airflow.

Features
– Front air intake with minimalism style
– Magnetic dust filter on the top
– Stylish case feet
– Removable dust filter at the bottom
– 2 x 3.5″ removable drive racks (compatible with 2.5″ SSDs)

Form Factor
Micro Tower

Motherboard Support
Micro ATX
Mini-ITX

Materials
SPCC + Plastic

I/O Panel
2 x USB 3.0
HD Mic/Audio
Power
Reset

Expansion
Slots: 4

Drive Bays
5.25″: 0
3.5″/2.5″ Combo: 2
2.5″: 2

Cooling Support
Front: 3 x 120mm / 2 x 140mm
Top: 2 x 120mm / 2 x 140mm
Rear: 1 x 120mm (1 x 120mm fan included)

Radiator Support
Front: < 280mm (Up to 55mm thickness with fan)
Rear: < 120mm

Clearance
Max GPU Length: 350mm
Max CPU Cooler Height: 160mm
Max PSU Length: 160mm

Dust Filters
Top
Bottom

Dimensions ( D x W x H )
405 x 205 x 400 mm

Weight
Net: 3.98 Kgs
Gross: 4.82 Kgs